Exhibitors

Final Koli Bandı, kullanım alanı çok fazla olduğundan her evde bulunabilen yapışkan banttır. Kristal Final Koli Bandının geniş bant, koli bandı, cam bant vb. çeşitli isimleri vardır. Ayrıca BOPP adı verilen bant ve reçineden oluştuğu da bilinmektedir. Bu bandın kullanımı kolaylaştırmak amacıyla her türlü malzeme ve kitap kaplamalarında küçültülmüş ambalaj kartonları içerisinde sunulmaktadır. Bu bant iki boyutta üretilmiştir. 50 mikron ve 42 mikron (90 yarda ve 48 milimetre) Çok kaliteli ve mukavemeti yüksek, çevreyle uyumlu, çeşitli ambalajlarda kullanılabilen, çok yüksek yapışma mukavemeti, dayanıklılık ve yüksek uzamaya karşı mukavemet Renk: Şeffaf Uygulama: Gıda ürünleri, kuru meyveler, endüstriyel ürünler, ev ve iş yerlerinde muhafaza edilen ürünler gibi orta ve yüksek gramajlı karton ve ambalajların ambalajlanmasında kullanılır. 50 kg ın üzerindeki ağır kutularda kullanılabilir. Her türlü kağıt ve kartonun paketlenmesi ve birleştirilmesinde kullanılır.

Final Universal Silicones, Is an acetoxy-based insulation material curing with humidity in the air. Applications: The insulation of washbasins, bathtubs, and shower cabins against water. In the construction sector and manufacturing industry. The filling and attaching of glass, metals, enamels, wooden, ceramics and other construction materials. Surfaces: All surfaces should be dry, clean, and free from dust and grease. If necessary, use a primer. Colors: Transparent, white and black. Storage: It must be kept away from water, frost, and bad weather conditions. It must be kept in wooden pallets and cool and dry conditions. The products that are opened must be consumed immediately. It should be stacked in a maximum of 6 layers. The product s storage time is 15 months if the protection conditions shall comply with the above subjects. Safety: Keep out of reach of children. The application should take place in well-ventilated rooms so that cross-linker vapors can escape. During vulcanization, a total of 4% acetic acid is released thus this cross-linker vapors should not be inhaled during long periods or in high concentrations. Avoid prolonged contact with skin. In case of any contact with the eyes, rinse immediately with plenty of water and seek medical advice. Avoid contact with food as long as the sealant is uncured.

Final MDF KIT, Are fast-curing adhesives composed of cyanoacrylate and aerosol activator. Applications: Assembling and repairing wooden parts in furniture, timber, kitchen, and plastic industries. Fixing MDF, rubber, cork, leather, many plastic surfaces, metal, porcelain, ceramic, cardboard, etc. Also, it is suitable where fast curing is needed. All surfaces should be dry clean and free from dust and grease. Surfaces should be smooth. The surface should implement full contact. You need to use enough adhesive on all surfaces. Color: Transparent Storage: It must be protected against water, frost, and bad weather conditions. It must be kept on the wooden pallets in cool and dry conditions. The products that are opened must be consumed immediately. It should be stacked in a maximum of 4 layers. The product storage is for two years if the protection conditions shall comply with the above subjects. Safety: Keep out of reach of children. Protect from sunlight and don t expose to temperatures above 50℃. Don t spray pierce or burn even after use, don t spray on a naked flame or any incandescent material. Use only in well-ventilated areas.

Final PU Foam, Is a multipurpose and single component polyurethane material that becomes hard with humidity. Application areas: Filling up the spaces and assembling doors and window frames. Filling of big cracks, holes, and spaces. Filling up the spaces at electronic and water installations. At the connection parts of the roof. Progressing temperature: 15°C - 25°C (it is not recommended if the working temperature is under 50°C because the foam does not get harder. Surfaces: All surfaces should be dry, clean, and free from dust and grease. If necessary, use a primer. Porous surfaces should be pre-moistened with water. Application: Shake can 20 to 30 times vigorously before use. Screw the adaptor tightly into the valve. Use the can in the reverse position. Joints and cavities should only be filled 50%. Cleaning: Cured foam can only be removed mechanically or with a PU foam cleaner. Color: Beige. Storage: It must be protected against water, frost, and weather conditions. The shelf life can reduce if the can is stored above +30°C and under +5°C. It must be kept on wooden pallets and cool and dry conditions. You should keep it in upright position. The products that are opened must be consumed immediately. It should be stacked in a maximum of 6 layers. the product s storage time is 15 months if the protection conditions comply with the above subjects. Safety: Keep out of reach of children. The can should not be thrown into the fire. The foam should be used in well-ventilated areas. Don t smoke, protect your eyes and wear suitable protective clothes and gloves. This can is under pressure, and because of that it shouldn t be exposed to direct sunlight and shouldn t be heated above +50°C as there is a risk of bursting.

Final Gasket Maker Silicone, Is an acetoxy-based insulation material, gets flexible at room temperature (RTV), strong to 330℃ temperature takes shape of the using place. Applications: Replaces cork, felt, asbestos, rubber, etc. Motors (intake manifolds, oil pans, valve covers, axle covers, thermostats, etc. Electric and electronic tools. Pipes, water installations, and these connections. Industrial ovens. At hot air cabals. joint places for vibration suction. Colors: Red, grey, black Storage: It must be protected against water, frost, and bad weather conditions. It must be kept on to the wooden pallets in cool and dry conditions. The open products must be consumed immediately. It should be stacked in a maximum of 6 layers. The product s storage is 15 months if the protection conditions shall comply with the above subjects. Safety: Keep out of reach of children. The application should take place in well ventilated rooms so that cross-linker vapors can escape. During vulcanization, a total of 4% acetic acid is released thus these cross-linker vapors should not be inhaled in long periods or high concentrations. Avoid prolonged contact with skin. In case of contact with eyes, rinse immediately with water.